2015 - 2023 Ford Mustang 4 OR 8 Inch Screen Non Amplified Base Model Radio Plug & Play Audio Harnesses: Kits

Regular price ~~$0.00~~ $60.00 Sale

SELECT KIT TYPE HERE. USE DOWN ARROW TO OPEN DROP DOWN MENU

Quantity

I OFFER MANY DIFFERENT KITS FOR ADDING A SUB , ADDING A 4 CHANNEL AMP OR ADDING A DSP AND OR FULL SYSTEM ETC . AS WELL AS MY PLUG & PLAY KICKER AND OTHER PRODUCTS .

USE THE DESCRIPTIONS BELOW AND THE DROP DOWN MENU ABOVE TO SELECT YOUR KIT .

THIS IS THE ORDER AND DESCRIPTION OF THE DROP DOWN MENU

TAXES ARE INCLUDED ON ALL KITS EXCEPT FOR CT RESIDENTS

SUB CONVERTERS WITH PLUG & PLAY HARNESS FOR ADDING BASS AMP KITS 1-10

KIT 1 ( GOOD ) KICKER SUB CONVERTER WITH REMOTE WIRE FOR 2015-2018 YEARS ONLY $60

KIT 2 PLUGNPLAYKITS PNPKITSPRO PREMIUM ACTIVE 2 CHANNEL LOC WITH 3FT HARNESS WITH BUILT IN LOAD RESISTORS & BASS BOOST AND COMPENSATION TECHNOLOGY . BASS X RESTORES FORD BASS ROLL OFF, GROUND ISOLATION & CLIP LIGHT & BASS KNOB WITH VOLT METER $ 180

• 2 channels of speaker level inputs (up to 40V input handling)

• 2 channels of RCA level outputs

• 2 channels of BASS outputs

• Bass boost and compensation technology

• Clip indicator

• Up to 9.5V of output

• 12V trigger output

• Level matching controls

• Turn-on mode selection (Remote, DC, Audio)

• On-board load resistors selection (20Ω, 60Ω, 20kΩ)

• Ground isolation selection (GND, ISO or 200Ω)

• Remote level controller with voltage display

KIT 3 PLUGNPLAYKITS PNPKITSPRO PREMIUM ACTIVE 2 CHANNEL LOC WITH 17 FT HARNESS WITH BUILT IN LOAD RESISTORS & BASS BOOST AND COMPENSATION TECHNOLOGY . BASS X RESTORES FORD BASS ROLL OFF, GROUND ISOLATION & CLIP LIGHT & BASS KNOB WITH VOLT METER $ 190

• 2 channels of speaker level inputs (up to 40V input handling)

• 2 channels of RCA level outputs

• 2 channels of BASS outputs

• Bass boost and compensation technology

• Clip indicator

• Up to 9.5V of output

• 12V trigger output

• Level matching controls

• Turn-on mode selection (Remote, DC, Audio)

• On-board load resistors selection (20Ω, 60Ω, 20kΩ)

• Ground isolation selection (GND, ISO or 200Ω)

• Remote level controller with voltage display

KIT 4 KICKER KEYLOC WITH 3FT HARNESS $240

KIT 5 KICKER KEYLOC WITH 17FT HARNESS $250

KIT 6 LINE OUTPUT CONVERTER HARNESS ONLY 6FT $80

KIT 7 LINE OUTPUT CONVERTER HARNESS ONLY 17FT $95

KICKER KEY 200.4 PLUG & PLAY 4 CHANNEL DSP AMP AND PLUG & PLAY VEHICLE SPECIFIC HARNESS. .

KIT 11 KICKER KEY 200.4 50 WATTS X 4 FOUR CHANNEL PLUG & PLAY AMP AND VEHICLE SPECIFIC HARNESS $465

THESE HARNESS WILL REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED .

KIT 11-1 KICKER KEY 180/200.4 HARNESS ONLY $210

THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED .

KIT 11-4 KICKER KEY HARNESS 180/200.4 ONLY WITH 17 FT HIGH LEVEL INPUT CABLE WITH LOAD RESISTOR FOR SUB AMP POWERED SUB INSTALL $260

THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED .

KIT 12 KICKER KEY 200.4 AMP WITH

PLUGNPLAYKITS PNPKITSPRO PREMIUM ACTIVE 2 CHANNEL LOC WITH 17 FT HARNESS WITH BUILT IN LOAD RESISTORS & BASS BOOST AND COMPENSATION TECHNOLOGY . BASS X RESTORES FORD BASS ROLL OFF, GROUND ISOLATION & CLIP LIGHT & BASS KNOB WITH VOLT METER $ 640

• 2 channels of speaker level inputs (up to 40V input handling)

• 2 channels of RCA level outputs

• 2 channels of BASS outputs

• Bass boost and compensation technology

• Clip indicator

• Up to 9.5V of output

• 12V trigger output

• Level matching controls

• Turn-on mode selection (Remote, DC, Audio)

• On-board load resistors selection (20Ω, 60Ω, 20kΩ)

• Ground isolation selection (GND, ISO or 200Ω)

• Remote level controller with voltage display

THESE HARNESS WILL REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED .

KICKER HIDEAWAY POWERED SUB IN 10 & 12 INCH

KIT 14 KICKER KEY 200.4 & 51HS12 HIDEAWAY 12 INCH SUB WITH BUILT IN 230 WATT RMS AMP $975

KIT 15 KICKER 51HS12 HIDEAWAY WITH HARNESS 230 WATTS RMS $525

KIT 16 KICKER KEY 200.4 & 46HS10 HIDEAWAY 10 INCH SUB WITH BUILT IN 180 WATT RMS AMP $850

THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED .

KIT 18 46HS10 HIDEAWAY 10 INCH SUB WITH BUILT IN 180 WATT RMS AMP & PLUG & PLAY HARNESS $450

KIT 19 KICKER KEY 200.4 4 CH AMP & KICKER KEY 500.1 MONO BLOCK SUB AMP WITH LOAD RESISTORS ADDED TO HARNESS $700

THESE HARNESS WILL REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED . PLUGNPLAYKITS 8 GAUGE 100% COPPER WIRING KIT AND BASS KNOB FOR 500.1 SOLD SEPARATELY UNDER POPULAR ACCESSORIES TAB UNDER DROP DOWN MENU .

KIT 20 KICKER KEY 500.1 AMP WITH HARNESS & BASS KNOB. $330

KIT 21 KICKER CXA8001T 800 WATT MONO BLOCK AMP & HARNESS $360

MUSWAY PRODUCTS ARE A HIGH END CLASS D SOUND QUALITY STAND ALONE DSP SPEAKERS & AMPS WITH AND WITHOUT DSP UP TO 12 CHANNRLS AND WITH PURE POWER ,SMALL SIZE ,HIGH BUILD QUALITY AT A GREAT PRICE POINT .

KIT 22 MUSWAY FOUR100 4 CHANNEL 120 WATTS X 4 RMS AMP WITH PLUG & PLAY HARNESS $660

Product Specifications:

OUTPUT POWER RMS @ 13.8v:

4 x 120w @ 4 Ohms
4 x 200w @ 2 Ohms
2 x 400w @ 4 Ohms bridged

OUTPUT POWER RMS @ 14.4v:

4 x 131w @ 4 Ohms
4 x 218w @ 2 Ohms
2 x 435w @ 4 Ohms bridged

Frequency Range -3dB: 4-39000 Hz
Damping Factor: 300
S/N ratio: > 107 dB
THD+N: < 0.02%
Input Sensitivity

5-0.2V

Channel 1/2

Crossover Modes: Full - HP-Copy
High Pass Filter: 50 - 5000 Hz

Channel 3/4

Crossover Modes: Full - HP - LP/BP
High Pass Filter: 10 - 500 Hz
Low Pass Filter: 50 - 5000 Hz
Bass Boost: 0 - 12 dB @ 45 Hz

Start-stop capability: 8.5V
High Level Input with EPS : Yes
Auto Turn On: Via DC or Signal
Fuse Rating: 1 x 70A (external)
Dimensions: 220 x 45 x 150 mm

KIT 23 MUSWAY M4+ 4-Channel Full Range Class D Amplifier with 8-Channel Digital Sound Processor

WITH PLUG & PLAY HARNESS $940

M4+ Product Overview

Start-Stop ready
EPS (Intelligent High-Level Input-Error Protection System)
Brushed aluminum heat sink and end panels
Auto Turn On via DC Offset or Signal Sensing
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards
Clipping LED’s
With the easy-to-use MUSWAY PC software, the M4+ can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet.
With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips.

Product Specifications:

OUTPUT POWER (RMS) at 13.8 VDC, 1% THD:

4CH at 4 Ohms:100 W x 4
4CH at 2 Ohms:135 W x 4
2CH - (Bridge 1/2; 3/4) at 4 Ohms: 270 W x 2

Distortion - THD (1 kHz at 4 Ohms, 90% Power) :0.1%
Bandwidth (-3 dB, 2 V RMS, 4Ohms): 10Hz-22KHz
S/N ratio at A weighted, 1 V, Max. Power: 90dB A
Damping factor at 1 kHz, 2 V RMS, 4 Ohms: >70
Input sensitivity: 10V-30V RMS(High-level) 2V-6V RMS(Low-level)
Input impedance: 13 0(High-level) 47K0(Low-level)
LOAD IMPEDANCE (MIN): 4CH: 2 Ohms 2CH - Bridge (1-2) (3-4) :4 Ohms
Dimensions (inches) : 5.9 (L) x 8.66 (W) x 1.73 (H)
Net Weight :1.6KG

KIT 24 MUSWAY FIVE100 5-Channel Full Range Class D Amplifier & Harness $920

FIVE.100+

Product Overview

Start-Stop ready
EPS (Intelligent High Level Input Error Protection System)
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must for full range Class D Amplifiers. Passes the difficult EMI European standards.
High- and Low-Level Inputs
RCA (Low Level) output.
Brushed aluminum heat sink and end panels
Auto Turn On via DC Offset or Signal Sensing
Remote level controller is included in the box

Product Specifications:

OUTPUT POWER RMS @ 14.4v:

(CH1 - CH4) 4 x 125w @ 4 Ohms
(CH1 - CH4) 4 x 225w @ 2 Ohms
(CH1 - CH4) 2 x 450w @ 4 Ohms bridged
(CH5) 1 x 250w @ 4 Ohms
(CH5) 1 x 425w @ 2 Ohms
(CH5) 1 x 650w @ 1 Ohms

Frequency Range -3dB: 4-39000 Hz
Damping Factor: 300
S/N ratio: > 107 dB
THD+N: < 0.02%
Input Sensitivity

Low-Level: 0,3 - 7,8V
High-Level: 0,7 - 15,6V

Channel 1/2

Crossover Modes: Full - HP-Copy
High Pass Filter: 50 - 5000 Hz

Channel 3/4

Crossover Modes: Full - HP - LP/BP
High Pass Filter: 10 - 500 Hz
Low Pass Filter: 50 - 5000 Hz

Channel 5

Subsonic Filter: 10 - 40 Hz
Low Pass Filter: 40 - 150 Hz
Bass Boost: 0 - 18 dB @ 45Hz
Phase Shift: 0 - 180

Start-stop capability: 8.5V
High Level Input with EPS : Yes
Auto Turn On: Via DC or Signal
Fuse Rating: 1 x 125A (external)
Dimensions: 295 x 45 x 150 mm

KIT 25 MUSWAY M5 5-Channel Full Range Class D Amplifier with 9-Channel Digital Sound Processor & Harness $820

M5 Product Overview

Start-Stop ready
EPS (Intelligent High-Level Input-Error Protection System)
Brushed aluminum heat sink and end panels
Auto Turn On via DC Offset or Signal Sensing
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards
Output Clipping LED
With the easy-to-use MUSWAY PC software, the M6 can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet.
With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips.

Product Specifications:

OUTPUT POWER (RMS) @ 13.8 VDC, 1% THD

(CH1 - CH4) 4 x 45 Watts RMS at 4 Ohms
(CH5 SUB) 1 x 180 Watts RMS at 4 Ohms
(CH1 - CH4) 4 x 50 Watts RMS at 3 Ohms
(CH5 SUB) 1 x 300 Watts RMS at 2 Ohms

High Level Input 6 - 18V RMS
Low Level Input* (AUX) 2 - 6V RMS

KIT 26 MUSWAY SIX100 6 CHANNEL FULL RANGE CLASS D AMP WITH PLUG & PLAY HARNESS $900

SIX.100 Product Overview

Start-Stop ready
EPS (Intelligent High Level Input Error Protection System)
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards.
High- and Low-Level Inputs
Brushed aluminum heat sink and end panels
Auto Turn On via DC Offset or Signal Sensing
Remote level controller is included in the box

Product Specifications:

OUTPUT POWER RMS @ 13.8v/14.4v:

6 x 110w/120w @ 4 Ohms
6 x 180w/196w @ 2 Ohms
3 x 360w/392w @ 4 Ohms bridged

Highpass Filter 50 - 5000 Hz (CH1/2)
Highpass Filter 10 - 500 Hz (CH3/4 & CH5/6)
Lowpass Filter 50 - 5000 Hz (CH3/4 & CH5/6)
Bandpass Function (CH3/4 & CH5/6)
Bass Boost 0 - 12 dB (CH5/6)
Input Mode Switch CH2/CH4/CH6
Damping Factor: >150
Signal-to-Noise Ratio: >107dB
High Level Inputs with EPS
THD: <0.02%
Auto Turn On Function
Bass Remote Controller
Dimensions: 11.42 x 1.77 x 5.91 inch

KIT 27 MUSWAY M6 6 CHANNEL AMP WITH 8 CHANNEL OF DSP AND PLUG & PLAY HARNESS . 1050

M6 Product Overview

Start-Stop ready
EPS (Intelligent High-Level Input-Error Protection System)
Brushed aluminum heat sink and end panels
Auto Turn On via DC Offset or Signal Sensing
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards
Output Clipping LED
With the easy-to-use MUSWAY PC software, the M6 can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet.
With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips.

Product Specifications:

OUTPUT POWER (RMS) @ 13.8 VDC, 1% THD

6 x 70 Watts RMS at 4 Ohms
6 x 105 Watts RMS at 2 Ohms
3 x 210 Watts RMS at 4 Ohms bridged

6 x High Level Input 4,8 – 20 V RMS
6 x RCA Low Level Input* (RCA) 2 – 6 V RMS
1 x AUX Input/Stereo (RCA) 2 – 6 V RMS
1 x Optical Input/Stereo (PCM, 96 kHz / 24 bit)
6 x Loudspeaker Output amplified
2 x Pre-Amplifier Output (RCA) 4 V RMS (configurable via DSP)
Dimensions: 150 x 44 x 220 mm

KIT 28 MUSWAY M6PRO 6-Channel Full Range Class D Amplifier with 10-Channel Digital Sound Processor $1150

M6Pro Product Overview

Start-Stop ready
EPS (Intelligent High-Level Input-Error Protection System)
Brushed aluminum heat sink and end panels
Auto Turn On via DC Offset or Signal Sensing
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards
Output Clipping LED
With the easy-to-use MUSWAY PC software, the M6 can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet.
With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips.

Product Specifications:

OUTPUT POWER (RMS) @ 13.8 VDC, 1% THD

6 x 235 Watts RMS at 2 Ohms (DHR*)
6 x 120 Watts RMS at 4 Ohms
6 x 200 Watts RMS at 2 Ohms
Bridged: 3 x 400 Watts RMS at 4 Ohms

High Level Input 7 - 29V RMS
Low Level Input* (AUX) 1 - 8V RMS

KIT 29 MUSWAY 8 CHANNEL FULL RANGE CLASS D AMPLIFIER WITH PLUG & PLAY HARNESS $1200

EIGHT.100 Product Overview

Start-Stop ready
EPS (Intelligent Hi-Level Input Error Protection System)
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards.
High- and Low-Level Inputs
Brushed aluminum heat sink and end panels
Auto Turn On via DC Offset or Signal Sensing
Remote level controller is included in the box

Product Specifications:

OUTPUT POWER RMS @ 13.8v:

8 x 100w @ 4 Ohms
8 x 180w @ 2 Ohms
4 x 360w @ 4 Ohms bridged

OUTPUT POWER RMS @ 14.4v:

8 x 110w @ 4 Ohms
8 x 195w @ 2 Ohms
4 x 390w @ 4 Ohms bridged

Frequency Range –3dB: 4 - 38000 Hz
Highpass Filter 50 - 5000 Hz (CH1/2 & CH5/6)
Highpass Filter 10 - 500 Hz (CH3/4 & CH7/8)
Lowpass Filter 50 - 5000 Hz (CH3/4 & CH7/8)
Bandpass Function (CH3/4 & CH7/8)
Input Mode CH2/CH4/CH6/CH8
RCA Inputs
High Level Inputs with EPS
Auto Turn On Function
Bass Remote Controller
Dimensions: 11.81 x 1.77 x 5.91 inches

KIT 30 MUSWAY ONE.600 Mono Class D Amplifier 650 WATTS RMS $525

ONE.600 Product Overview

Start-Stop ready
EPS (Intelligent High-Level Input-Error Protection System)
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses (EMF) interference which is a must for Class D amplifiers.
High- and Low-Level Inputs
RCA (Low level) Output
Brushed aluminum heat sink and end panels
Auto Turn On via DC Offset or Signal Sensing
Remote Bass Level Controller is included in the box

Product Specifications:

OUTPUT POWER RMS @ 13.8v:

1 x 250 Watts RMS @ 4 Ohms
1 x 400 Watts RMS @ 2 Ohms
1 x 650 Watts RMS @ 1 Ohm

OUTPUT POWER RMS @ 14.4v:

1 x 272 Watts RMS @ 4 Ohms
1 x 435 Watts RMS @ 2 Ohms
1 x 707 Watts RMS @ 1 Ohm

Damping Factor: >750dB
Signal-to-Noise Ratio: <0.05dB
Subsonic Filter 10 - 40 Hz
Lowpass Filter 40 - 150 Hz
Bass Boost 0 - 18dB @45Hz
Phase Shift 0 - 180°
RCA Inputs, RCA Outputs
High-Level Inputs with EPSAuto Turn On Function
Filter Bypass Function (Pure Amplification)
Quick Connect Speaker Output
Bass Remote Controller
Dimensions: 7.87 x 5.91 x 1.77 inch

KIT 31 MUSWAY ONE.1000 Mono Class D Amplifier 1050 RMS $650

ONE.1000 Product Overview

Start-Stop ready
EPS (Intelligent High-Level Input-Error Protection System)
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses (EMF) interference which is a must for Class D amplifiers.
High- and Low-Level Inputs
RCA (Low Level) Output
Brushed aluminum heat sink and end panels
Auto Turn On via DC Offset or Signal Sensing
Remote Bass Level Controller is included in the box

Product Specifications:

OUTPUT POWER RMS @ 13.8v:

1 x 400w @ 4 Ohms
1 x 650w @ 2 Ohms
1 x 1050w @ 1 Ohm

OUTPUT POWER RMS @ 14.4v:

1 x 435w @ 4 Ohms
1 x 707w @ 2 Ohms
1 x 1143w @ 1 Ohm

Damping Factor: >320
Signal-to-Noise Ratio: 105dB
THD <0.05%
Subsonic Filter 10 - 40 Hz
Lowpass Filter 40 - 150 Hz
Bass Boost 0 - 18 dB
Phase Shift 0 - 180°
RCA Inputs, RCA Outputs
High-Level Inputs with EPS
Auto Turn On Function
Filter Bypass Function (Pure Amplification)
Quick Connect Speaker Output
Bass Remote Controller
Dimensions: 9.45 x 1.77 x 5.91 inch

KIT 32 MUSWAY ONE.2000 Mono Class D Amplifier & Harness 2040 RMS $1070

ONE.2000 Product Overview

Extreme Power Handling: Easily drives an array of woofers wired to a 1-ohm load, showcasing its capability to handle diverse audio setups with exceptional efficiency and power.
Advanced EMC Interference Suppression: The 4-fold laminated board effectively suppresses Electromagnetic interference (EMF), ensuring a clean audio signal and superior performance due to its favorable topology.
EPS Technology for Seamless Integration: Featuring EPS technology, the ONE.2000 ensures that when connected to an OEM factory radio, no functions are impaired, and no error messages are written into the vehicle memory. This innovative technology guarantees a seamless integration experience.
This amplifier offers versatile power configurations, adapting to various speaker setups and ensuring optimal performance.
Convenient Control with Bass Remote: Bass Remote Controller Take control of your bass preferences on-the-fly with the included Bass Remote Controller, enhancing your overall audio experience.

Product Specifications:

OUTPUT POWER RMS @ 13.8v:

1 x 850w @ 4Ohms
1 x 1400w @ 2Ohms
1 x 1850w @ 1Ohm

OUTPUT POWER RMS @ 14.4v:

1 x 925w @ 4Ohms
1 x 1500w @ 2Ohms
1 x 2040w @ 1Ohm

Subsonic Filter 10 - 40 Hz
Lowpass Filter 40 - 150 Hz
Bass Boost 0 - 18dB @45Hz
Damping Factor >235
Signal-to-Noise Ratio: 104 dB
THD is <0.05%
Phase Shift 0 - 180°
RCA Inputs, RCA Outputs
High-Level Inputs with EPS
Auto Turn On Function
Filter Bypass Function (Pure Amplification)
Quick Connect Speaker Output
Bass Remote Controller
Dimensions: 12.60 x 6.30 x 1.97 inch

KIT 33 MUSWAY DSP68 8-Channel DSP with PC/APP Control & Harness $700

CONVERTERS & HARNESS FOR ADDING FULL SYSTEM

KIT 34 2014- 2018 FORD 4 CHANNEL/ HI LEVEL INPUT / LOOP BACK HARNESS $175

KIT 35 2019 - 2020 F150 & 2019 SUPERDUTY 4 CHANNEL/ HI LEVEL INPUT / LOOP BACK HARNESS WITH LOAD RESISTORS $200

KIT 36 2013 - 2018 FORD LC71/DSP 17 FT PLUG & PLAY HARNESS $165

KIT 37 NEW LC5IPRO WITH 17 FT PLUG & PLAY HARNESS . FRONT REAR AND SUB RCA OUTPUT WITH ACCUBASS TO RESTORE BASS THAT THE FACTORY RADIO TAKES OUT & BUILT IN LOAD RESISTORS AND BASS KNOB $430

KIT 38 2019 AND UP FORD LC6I / LC7I HARNESS ONLY WITH REQUIRED LOAD RESISTORS $200

2015 - 2023 Ford Mustang 4 OR 8 Inch Screen Non Amplified Base Model Radio Plug & Play Audio Harnesses: Kits

USE THE DESCRIPTIONS BELOW AND THE DROP DOWN MENU ABOVE TO SELECT YOUR KIT .

THIS IS THE ORDER AND DESCRIPTION OF THE DROP DOWN MENU

TAXES ARE INCLUDED ON ALL KITS EXCEPT FOR CT RESIDENTS

SUB CONVERTERS WITH PLUG & PLAY HARNESS FOR ADDING BASS AMP KITS 1-10

KIT 1 ( GOOD ) KICKER SUB CONVERTER WITH REMOTE WIRE FOR 2015-2018 YEARS ONLY $60

KIT 2 PLUGNPLAYKITS PNPKITSPRO PREMIUM ACTIVE 2 CHANNEL LOC WITH 3FT HARNESS WITH BUILT IN LOAD RESISTORS & BASS BOOST AND COMPENSATION TECHNOLOGY . BASS X RESTORES FORD BASS ROLL OFF, GROUND ISOLATION & CLIP LIGHT & BASS KNOB WITH VOLT METER $ 180

KIT 3 PLUGNPLAYKITS PNPKITSPRO PREMIUM ACTIVE 2 CHANNEL LOC WITH 17 FT HARNESS WITH BUILT IN LOAD RESISTORS & BASS BOOST AND COMPENSATION TECHNOLOGY . BASS X RESTORES FORD BASS ROLL OFF, GROUND ISOLATION & CLIP LIGHT & BASS KNOB WITH VOLT METER $ 190

KICKER KEY 200.4 PLUG & PLAY 4 CHANNEL DSP AMP AND PLUG & PLAY VEHICLE SPECIFIC HARNESS. .

KIT 11-1 KICKER KEY 180/200.4 HARNESS ONLY $210

KIT 11-4 KICKER KEY HARNESS 180/200.4 ONLY WITH 17 FT HIGH LEVEL INPUT CABLE WITH LOAD RESISTOR FOR SUB AMP POWERED SUB INSTALL $260

PLUGNPLAYKITS PNPKITSPRO PREMIUM ACTIVE 2 CHANNEL LOC WITH 17 FT HARNESS WITH BUILT IN LOAD RESISTORS & BASS BOOST AND COMPENSATION TECHNOLOGY . BASS X RESTORES FORD BASS ROLL OFF, GROUND ISOLATION & CLIP LIGHT & BASS KNOB WITH VOLT METER $ 640

KICKER HIDEAWAY POWERED SUB IN 10 & 12 INCH

KIT 14 KICKER KEY 200.4 & 51HS12 HIDEAWAY 12 INCH SUB WITH BUILT IN 230 WATT RMS AMP $975

KIT 15 KICKER 51HS12 HIDEAWAY WITH HARNESS 230 WATTS RMS $525

KIT 16 KICKER KEY 200.4 & 46HS10 HIDEAWAY 10 INCH SUB WITH BUILT IN 180 WATT RMS AMP $850

KIT 18 46HS10 HIDEAWAY 10 INCH SUB WITH BUILT IN 180 WATT RMS AMP & PLUG & PLAY HARNESS $450

KIT 19 KICKER KEY 200.4 4 CH AMP & KICKER KEY 500.1 MONO BLOCK SUB AMP WITH LOAD RESISTORS ADDED TO HARNESS $700

MUSWAY PRODUCTS ARE A HIGH END CLASS D SOUND QUALITY STAND ALONE DSP SPEAKERS & AMPS WITH AND WITHOUT DSP UP TO 12 CHANNRLS AND WITH PURE POWER ,SMALL SIZE ,HIGH BUILD QUALITY AT A GREAT PRICE POINT .

KIT 22 MUSWAY FOUR100 4 CHANNEL 120 WATTS X 4 RMS AMP WITH PLUG & PLAY HARNESS $660

Product Specifications:

OUTPUT POWER RMS @ 13.8v:

4 x 120w @ 4 Ohms

4 x 200w @ 2 Ohms

2 x 400w @ 4 Ohms bridged

OUTPUT POWER RMS @ 14.4v:

4 x 131w @ 4 Ohms

4 x 218w @ 2 Ohms

2 x 435w @ 4 Ohms bridged

Frequency Range -3dB: 4-39000 Hz

Damping Factor: 300

S/N ratio: > 107 dB

THD+N: < 0.02%

Input Sensitivity

5-0.2V

Channel 1/2

Crossover Modes: Full - HP-Copy

High Pass Filter: 50 - 5000 Hz

Channel 3/4

Crossover Modes: Full - HP - LP/BP

High Pass Filter: 10 - 500 Hz

Low Pass Filter: 50 - 5000 Hz

Bass Boost: 0 - 12 dB @ 45 Hz

Start-stop capability: 8.5V

High Level Input with EPS : Yes

Auto Turn On: Via DC or Signal

Fuse Rating: 1 x 70A (external)

Dimensions: 220 x 45 x 150 mm

KIT 23 MUSWAY M4+ 4-Channel Full Range Class D Amplifier with 8-Channel Digital Sound Processor

WITH PLUG & PLAY HARNESS $940

M4+ Product Overview

Start-Stop ready

EPS (Intelligent High-Level Input-Error Protection System)

Brushed aluminum heat sink and end panels

Auto Turn On via DC Offset or Signal Sensing

Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards

Clipping LED’s

With the easy-to-use MUSWAY PC software, the M4+ can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet.

Product Specifications:

OUTPUT POWER (RMS) at 13.8 VDC, 1% THD:

4CH at 4 Ohms:100 W x 4

4CH at 2 Ohms:135 W x 4

2CH - (Bridge 1/2; 3/4) at 4 Ohms: 270 W x 2

Distortion - THD (1 kHz at 4 Ohms, 90% Power) :0.1%

Bandwidth (-3 dB, 2 V RMS, 4Ohms): 10Hz-22KHz

S/N ratio at A weighted, 1 V, Max. Power: 90dB A

Damping factor at 1 kHz, 2 V RMS, 4 Ohms: >70

Input sensitivity: 10V-30V RMS(High-level) 2V-6V RMS(Low-level)

Input impedance: 13 0(High-level) 47K0(Low-level)

LOAD IMPEDANCE (MIN): 4CH: 2 Ohms 2CH - Bridge (1-2) (3-4) :4 Ohms

Dimensions (inches) : 5.9 (L) x 8.66 (W) x 1.73 (H)

Net Weight :1.6KG

KIT 24 MUSWAY FIVE100 5-Channel Full Range Class D Amplifier & Harness $920

FIVE.100+

Product Overview

Start-Stop ready

EPS (Intelligent High Level Input Error Protection System)

Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must for full range Class D Amplifiers. Passes the difficult EMI European standards.

High- and Low-Level Inputs

RCA (Low Level) output.