Toyota 2004 - 2019 Factory Base Model NON Amplified Non Premium Non JBL Radio Plug 'n Play Audio Harnesses:
Regular price
$0.00
$60.00
I OFFER MANY DIFFERENT KITS FOR ADDING A SUB , ADDING A 4 CHANNEL AMP OR ADDING A DSP AND OR FULL SYSTEM ETC . AS WELL AS MY PLUG & PLAY KICKER AND OTHER PRODUCTS .
COMPATIBILITY CHART . PLEASE CONTACT US IF YOU DO NOT SEE YOUR YEAR AS IT MAY BE AVAILABLE.
COMPATIBILITY CHART . PLEASE CONTACT US IF YOU DO NOT SEE YOUR YEAR AS IT MAY BE AVAILABLE.
|
TOYOTA 4-Runner 2014 - 2016 |
USE THE DESCRIPTIONS BELOW AND THE DROP DOWN MENU ABOVE TO SELECT YOUR KIT .
THIS IS THE ORDER AND DESCRIPTION OF THE DROP DOWN MENU
SUB CONVERTERS WITH PLUG & PLAY HARNESS FOR ADDING BASS AMP KITS
KIT 1 ( GOOD ) KICKER SUB CONVERTER WITH REMOTE WIRE $60
KIT 2 PLUGNPLAYKITS PNPKITSPRO PREMIUM ACTIVE 2 CHANNEL LOC WITH 6 FT HARNESS WITH BUILT IN LOAD RESISTORS & BASS BOOST AND COMPENSATION TECHNOLOGY . BASS X RESTORES BASS ROLL OFF, GROUND ISOLATION & CLIP LIGHT & BASS KNOB WITH VOLT METER $ 170
• 2 channels of speaker level inputs (up to 40V input handling)
• 2 channels of RCA level outputs
• 2 channels of BASS outputs
• Bass boost and compensation technology
• Clip indicator
• Up to 9.5V of output
• 12V trigger output
• Level matching controls
• Turn-on mode selection (Remote, DC, Audio)
• On-board load resistors selection (20Ω, 60Ω, 20kΩ)
• Ground isolation selection (GND, ISO or 200Ω)
• Remote level controller with voltage display
KIT 3 PLUGNPLAYKITS PNPKITSPRO PREMIUM ACTIVE 2 CHANNEL LOC WITH 17 FT HARNESS WITH BUILT IN LOAD RESISTORS & BASS BOOST AND COMPENSATION TECHNOLOGY . BASS X RESTORES FORD BASS ROLL OFF, GROUND ISOLATION & CLIP LIGHT & BASS KNOB WITH VOLT METER $ 180
• 2 channels of speaker level inputs (up to 40V input handling)
• 2 channels of RCA level outputs
• 2 channels of BASS outputs
• Bass boost and compensation technology
• Clip indicator
• Up to 9.5V of output
• 12V trigger output
• Level matching controls
• Turn-on mode selection (Remote, DC, Audio)
• On-board load resistors selection (20Ω, 60Ω, 20kΩ)
• Ground isolation selection (GND, ISO or 200Ω)
• Remote level controller with voltage display
KIT 4 KICKER KEYLOC WITH 3FT HARNESS $240
KIT 5 KICKER KEYLOC WITH 17FT HARNESS $250
KIT 6 LINE OUTPUT CONVERTER HARNESS ONLY 6FT $80
KIT 7 LINE OUTPUT CONVERTER HARNESS ONLY 17FT $95
KIT 8 RECOIL D11700.4 COMPACT 4 CHANNEL CLASS D AMP WITH RCA SUB OUTPUT WITH PLUG & PLAY HARNESS. $480
Specifications:
RMS power @ 4 ohm (14.4V): 4 x 110W
RMS power @ 2 ohm (14.4V): 4 x 160W
RMS power @ 1ohm (14.4V): N/A
RMS power @ 4 ohm mono (14.4V): 2 x 340W
Frequency Response: 10Hz-24KHz
Signal to Noise: 85dB
Efficiency @ 4 ohm: 78%
Input Sensitivity: 0.2V-12V
High Pass Filter: 3OHz -300Hz
Low Pass Filter: 3OHz-300Hz
Fuse Rating (ATC): 50A
Dimensions (mm): 6.22″ x 5.37″ x 2.09″(158mm x 136.5mm x 53mm)
KIT 9 RECOIL D111400.5 COMPACT 5 CHANNEL CLASS D AMP WITH PLUG & PLAY HARNESS . COMES WITH BASS KNOB WITH POWER LIGHT & CLIP LED .$620
FITS UNDER THE FRONT SEATS WITH STINGER BRACKET OR DR SIDE REAR QUARTER PANEL
KICKER KEY 200.4 PLUG & PLAY 4 CHANNEL DSP AMP AND PLUG & PLAY VEHICLE SPECIFIC HARNESS. .
KIT 11 KICKER KEY 200.4 50 WATTS X 4 FOUR CHANNEL PLUG & PLAY AMP AND VEHICLE SPECIFIC HARNESS $475
THESE HARNESS WILL REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS INCLUDED .
KIT 11-1 KICKER KEY 180/200.4 HARNESS ONLY $210
THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED .
KIT 11-4 KICKER KEY HARNESS 180/200.4 ONLY WITH 17 FT HIGH LEVEL INPUT CABLE WITH LOAD RESISTOR FOR SUB AMP POWERED SUB INSTALL $260
THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED .
KIT 12 KICKER KEY 200.4 AMP WITH
PLUGNPLAYKITS PNPKITSPRO PREMIUM ACTIVE 2 CHANNEL LOC WITH 17 FT HARNESS WITH BUILT IN LOAD RESISTORS & BASS BOOST AND COMPENSATION TECHNOLOGY . BASS X RESTORES FORD BASS ROLL OFF, GROUND ISOLATION & CLIP LIGHT & BASS KNOB WITH VOLT METER $ 650
• 2 channels of speaker level inputs (up to 40V input handling)
• 2 channels of RCA level outputs
• 2 channels of BASS outputs
• Bass boost and compensation technology
• Clip indicator
• Up to 9.5V of output
• 12V trigger output
• Level matching controls
• Turn-on mode selection (Remote, DC, Audio)
• On-board load resistors selection (20Ω, 60Ω, 20kΩ)
• Ground isolation selection (GND, ISO or 200Ω)
• Remote level controller with voltage display
THESE HARNESS WILL REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS INCLUDED .
KICKER HIDEAWAY POWERED SUB IN 10 & 12 INCH
KIT 14 KICKER KEY 200.4 & 51HS12 HIDEAWAY 12 INCH SUB WITH BUILT IN 230 WATT RMS AMP $975
KIT 15 KICKER 51HS12 HIDEAWAY WITH HARNESS 230 WATTS RMS $525
KIT 16 KICKER KEY 200.4 & 46HS10 HIDEAWAY 10 INCH SUB WITH BUILT IN 180 WATT RMS AMP $850
THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED .
KIT 18 46HS10 HIDEAWAY 10 INCH SUB WITH BUILT IN 180 WATT RMS AMP & PLUG & PLAY HARNESS $450
KIT 19 KICKER KEY 200.4 4 CH AMP & KICKER KEY 500.1 MONO BLOCK SUB AMP WITH LOAD RESISTORS ADDED TO HARNESS $850
THESE HARNESS WILL REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED . PLUGNPLAYKITS 8 GAUGE 100% COPPER WIRING KIT AND BASS KNOB FOR 500.1 SOLD SEPARATELY UNDER POPULAR ACCESSORIES TAB UNDER DROP DOWN MENU .
KIT 20 KICKER KEY 500.1 AMP WITH HARNESS & BASS KNOB. $420
KIT 21 KICKER CXA8001T 800 WATT MONO BLOCK AMP & HARNESS $360
MUSWAY PRODUCTS ARE A HIGH END CLASS D SOUND QUALITY STAND ALONE DSP SPEAKERS & AMPS WITH AND WITHOUT DSP UP TO 12 CHANNRLS AND WITH PURE POWER ,SMALL SIZE ,HIGH BUILD QUALITY AT A GREAT PRICE POINT .
KIT 22 MUSWAY FOUR100 4 CHANNEL 120 WATTS X 4 RMS AMP WITH PLUG & PLAY HARNESS $720
Product Specifications:
-
OUTPUT POWER RMS @ 13.8v:
-
4 x 120w @ 4 Ohms
-
4 x 200w @ 2 Ohms
-
2 x 400w @ 4 Ohms bridged
-
OUTPUT POWER RMS @ 14.4v:
-
4 x 131w @ 4 Ohms
-
4 x 218w @ 2 Ohms
-
2 x 435w @ 4 Ohms bridged
-
Frequency Range -3dB: 4-39000 Hz
-
Damping Factor: 300
-
S/N ratio: > 107 dB
-
THD+N: < 0.02%
-
Input Sensitivity
-
5-0.2V
-
Channel 1/2
-
Crossover Modes: Full - HP-Copy
-
High Pass Filter: 50 - 5000 Hz
-
Channel 3/4
-
Crossover Modes: Full - HP - LP/BP
-
High Pass Filter: 10 - 500 Hz
-
Low Pass Filter: 50 - 5000 Hz
-
Bass Boost: 0 - 12 dB @ 45 Hz
-
Start-stop capability: 8.5V
-
High Level Input with EPS : Yes
-
Auto Turn On: Via DC or Signal
-
Fuse Rating: 1 x 70A (external)
-
Dimensions: 220 x 45 x 150 mm
KIT 23 MUSWAY M4+ 4-Channel Full Range Class D Amplifier with 8-Channel Digital Sound Processor
WITH PLUG & PLAY HARNESS $940
M4+ Product Overview
-
Start-Stop ready
-
EPS (Intelligent High-Level Input-Error Protection System)
-
Brushed aluminum heat sink and end panels
-
Auto Turn On via DC Offset or Signal Sensing
-
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards
-
Clipping LED’s
-
With the easy-to-use MUSWAY PC software, the M4+ can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet.
-
With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips.
KIT 24 MUSWAY FIVE100 5-Channel Full Range Class D Amplifier & Harness $920
FIVE.100+
Product Overview
-
Start-Stop ready
-
EPS (Intelligent High Level Input Error Protection System)
-
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must for full range Class D Amplifiers. Passes the difficult EMI European standards.
-
High- and Low-Level Inputs
-
RCA (Low Level) output.
-
Brushed aluminum heat sink and end panels
-
Auto Turn On via DC Offset or Signal Sensing
-
Remote level controller is included in the box
KIT 25 MUSWAY M5 5-Channel Full Range Class D Amplifier with 9-Channel Digital Sound Processor & Harness $976
M5 Product Overview
-
Start-Stop ready
-
EPS (Intelligent High-Level Input-Error Protection System)
-
Brushed aluminum heat sink and end panels
-
Auto Turn On via DC Offset or Signal Sensing
-
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards
-
Output Clipping LED
-
With the easy-to-use MUSWAY PC software, the M6 can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet.
-
With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips.
KIT 26 MUSWAY SIX100 6 CHANNEL FULL RANGE CLASS D AMP WITH PLUG & PLAY HARNESS $900
-
Start-Stop ready
-
EPS (Intelligent High Level Input Error Protection System)
-
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards.
-
High- and Low-Level Inputs
-
Brushed aluminum heat sink and end panels
-
Auto Turn On via DC Offset or Signal Sensing
-
Remote level controller is included in the box
KIT 27 MUSWAY M6 6 CHANNEL AMP WITH 8 CHANNEL OF DSP AND PLUG & PLAY HARNESS . 1050
M6 Product Overview
-
Start-Stop ready
-
EPS (Intelligent High-Level Input-Error Protection System)
-
Brushed aluminum heat sink and end panels
-
Auto Turn On via DC Offset or Signal Sensing
-
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards
-
Output Clipping LED
-
With the easy-to-use MUSWAY PC software, the M6 can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet.
-
With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips.
KIT 28 MUSWAY M6PRO 6-Channel Full Range Class D Amplifier with 10-Channel Digital Sound Processor $1300
M6Pro Product Overview
-
Start-Stop ready
-
EPS (Intelligent High-Level Input-Error Protection System)
-
Brushed aluminum heat sink and end panels
-
Auto Turn On via DC Offset or Signal Sensing
-
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards
-
Output Clipping LED
-
With the easy-to-use MUSWAY PC software, the M6 can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet.
-
With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips.
KIT 29 MUSWAY 8 CHANNEL FULL RANGE CLASS D AMPLIFIER WITH PLUG & PLAY HARNESS $1200
EIGHT.100 Product Overview
-
Start-Stop ready
-
EPS (Intelligent Hi-Level Input Error Protection System)
-
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards.
-
High- and Low-Level Inputs
-
Brushed aluminum heat sink and end panels
-
Auto Turn On via DC Offset or Signal Sensing
-
Remote level controller is included in the box
KIT 30 MUSWAY ONE.600 Mono Class D Amplifier 650 WATTS RMS $525
ONE.600 Product Overview
-
Start-Stop ready
-
EPS (Intelligent High-Level Input-Error Protection System)
-
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses (EMF) interference which is a must for Class D amplifiers.
-
High- and Low-Level Inputs
-
RCA (Low level) Output
-
Brushed aluminum heat sink and end panels
-
Auto Turn On via DC Offset or Signal Sensing
-
Remote Bass Level Controller is included in the box
KIT 31 MUSWAY ONE.1000 Mono Class D Amplifier 1050 RMS $650
ONE.1000 Product Overview
-
Start-Stop ready
-
EPS (Intelligent High-Level Input-Error Protection System)
-
Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses (EMF) interference which is a must for Class D amplifiers.
-
High- and Low-Level Inputs
-
RCA (Low Level) Output
-
Brushed aluminum heat sink and end panels
-
Auto Turn On via DC Offset or Signal Sensing
-
Remote Bass Level Controller is included in the box
KIT 32 MUSWAY ONE.2000 Mono Class D Amplifier & Harness 2040 RMS $1070
ONE.2000 Product Overview
- Extreme Power Handling: Easily drives an array of woofers wired to a 1-ohm load, showcasing its capability to handle diverse audio setups with exceptional efficiency and power.
- Advanced EMC Interference Suppression: The 4-fold laminated board effectively suppresses Electromagnetic interference (EMF), ensuring a clean audio signal and superior performance due to its favorable topology.
- EPS Technology for Seamless Integration: Featuring EPS technology, the ONE.2000 ensures that when connected to an OEM factory radio, no functions are impaired, and no error messages are written into the vehicle memory. This innovative technology guarantees a seamless integration experience.
- This amplifier offers versatile power configurations, adapting to various speaker setups and ensuring optimal performance.
- Convenient Control with Bass Remote: Bass Remote Controller Take control of your bass preferences on-the-fly with the included Bass Remote Controller, enhancing your overall audio experience.
KIT 33 MUSWAY DSP68 8-Channel DSP with PC/APP Control & Harness $700
\
CONVERTERS & HARNESS FOR ADDING FULL SYSTEM
KIT 34 4 CHANNEL/ HI LEVEL INPUT / LOOP BACK HARNESS $200
KIT 36 FOUR CHANNEL ACTIVE LOC , LC5IPRO/DSP 17 FT PLUG & PLAY HARNESS $200
KIT 37 NEW LC5IPRO WITH 17 FT PLUG & PLAY HARNESS . FRONT REAR AND SUB RCA OUTPUT WITH ACCUBASS TO RESTORE BASS THAT THE FACTORY RADIO TAKES OUT & BUILT IN LOAD RESISTORS AND BASS KNOB $410
Back to Home Page