I OFFER MANY DIFFERENT KITS FOR ADDING A SUB , ADDING A 4 CHANNEL AMP OR ADDING A DSP  AND OR FULL SYSTEM  ETC . AS WELL AS MY PLUG & PLAY KICKER AND JBL PRODUCTS .  

USE THE DESCRIPTIONS BELOW AND THE DROP DOWN MENU ABOVE TO SELECT YOUR KIT .

THIS LISTING IS FOR MY PLUG & PLAY AUDIO UPGRADE KITS FOR NON AMPLIFIED BASE MODEL RADIOS FOR NISSAN VEHICLES . 

I ALSO OFFER AUDIOCONTROL PRODUCTS THAT COME WITH PLUG & PLAY HARNESS . I AM A AUTHORIZED  DIRECT DEALER AND OFFER A 5 YEAR WARRANTY ON THEIR PRODUCTS .  

AUDIOCONTROL AMPS COME WITH BUILT IN ACTIVE CONVERTERS . NO EXTRA PARTS NEEDED ALSO HAS FACTORY CORRECTION & DSP PROCESSORS MAKING THEM THE TOP OF LINE PRODUCT FOR FACTORY RADIO INTEGRATION

IF YOU DO NOT  SEE YOUR YEAR IT MAY BE AVAILABLE . PLEASE REACH OUT TO US 

Year(s) Make Model

2009-2020 NISSAN 370Z ALL TRIM LEVELS —

2007-2025 NISSAN ALTIMA ALL TRIM LEVELS —

2008-2022 NISSAN ARMADA ALL TRIM LEVELS —

2009-2014 NISSAN CUBE ALL TRIM LEVELS —

2008-2025 NISSAN FRONTIER ALL TRIM LEVELS —

2011-2017 NISSAN JUKE ALL TRIM LEVELS —

2011-2018 NISSAN LEAF ALL TRIM LEVELS —

2007-2016 NISSAN MAXIMA ALL TRIM LEVELS —

2003-2025 NISSAN MURANO ALL TRIM LEVELS —

2012-2019 NISSAN NV ALL TRIM LEVELS —

2013-2019 NISSAN NV200 ALL TRIM LEVELS —

2010-2025 NISSAN PATHFINDER ALL TRIM LEVELS —

2011-2016 NISSAN QUEST ALL TRIM LEVELS —

2008-2025 NISSAN ROGUE ALL TRIM LEVELS —

2007-2025 NISSAN SENTRA ALL TRIM LEVELS —

2008-2025 NISSAN TITAN ALL TRIM LEVELS —

2007-2025 NISSAN VERSA ALL TRIM LEVELS —

2014-2023 NISSAN VERSA NOTE ALL TRIM LEVELS —

2008-2017 NISSAN XTERRA ALL TRIM LEVELS —

THIS IS THE ORDER AND DESCRIPTION OF THE DROP DOWN MENU

SUB CONVERTERS WITH PLUG & PLAY HARNESS FOR ADDING BASS AMP KITS 

KIT 1 ( GOOD ) KICKER SUB CONVERTER WITH REMOTE WIRE $60 

KIT 2  PLUGNPLAYKITS PNPKITSPRO PREMIUM ACTIVE 2 CHANNEL LOC  WITH 6 FT HARNESS WITH BUILT IN LOAD RESISTORS & BASS  BOOST AND COMPENSATION TECHNOLOGY  . BASS X RESTORES BASS ROLL OFF, GROUND ISOLATION   & CLIP LIGHT & BASS KNOB  WITH VOLT METER    $ 180

• 2 channels of speaker level inputs (up to 40V input handling)

• 2 channels of RCA level outputs

• 2 channels of BASS outputs

• Bass boost and compensation technology

• Clip indicator

• Up to 9.5V of output

• 12V trigger output

• Level matching controls

• Turn-on mode selection (Remote, DC, Audio)

• On-board load resistors selection (20Ω, 60Ω, 20kΩ)

• Ground isolation selection (GND, ISO or 200Ω)

• Remote level controller with voltage display

KIT 3 PLUGNPLAYKITS PNPKITSPRO PREMIUM ACTIVE 2 CHANNEL LOC  WITH 17 FT  HARNESS WITH BUILT IN LOAD RESISTORS & BASS  BOOST AND COMPENSATION TECHNOLOGY  . BASS X RESTORES BASS ROLL OFF, GROUND ISOLATION   & CLIP LIGHT & BASS KNOB  WITH VOLT METER $ 190

• 2 channels of speaker level inputs (up to 40V input handling)

• 2 channels of RCA level outputs

• 2 channels of BASS outputs

• Bass boost and compensation technology

• Clip indicator

• Up to 9.5V of output

• 12V trigger output

• Level matching controls

• Turn-on mode selection (Remote, DC, Audio)

• On-board load resistors selection (20Ω, 60Ω, 20kΩ)

• Ground isolation selection (GND, ISO or 200Ω)

• Remote level controller with voltage display

KIT 4 KICKER KEYLOC WITH 3FT HARNESS  $240 

KIT 5  KICKER KEYLOC WITH 17FT HARNESS  $250

KIT 6 LINE OUTPUT CONVERTER ONLY 6FT  $80

KIT 7 LINE OUTPUT CONVERTER HARNESS ONLY 17FT $90

KIT 8 HIGH LEVEL INPUT HARNESS ONLY 6 FT    $70

KIT 9 HIGH LEVEL INPUT HARNESS ONLY 17FT $80

 LOOKING FOR KICKER INTERIOR SPEAKERS CLICK HERE KICKER – Plug N Play Kits

KICKER KEY 200.4 PLUG & PLAY 4 CHANNEL DSP AMP AND PLUG & PLAY VEHICLE SPECIFIC HARNESS. 

KIT 11 KICKER KEY 200.4  50 WATTS X 4 FOUR CHANNEL PLUG & PLAY AMP AND VEHICLE SPECIFIC HARNESS $475

THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED . 

KIT 11-1 KICKER KEY 180/200.4 HARNESS ONLY $199

 THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED .

 KIT 11-2 KICKER KEY 200.4 AMP WITH KICKER SUB CONVERTER AND PLUG & PLAY HARNESS $575

THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED .

 KIT 12 PLUGNPLAYKITS PNPKITSPRO PREMIUM ACTIVE 2 CHANNEL LOC  WITH 17 FT HARNESS WITH BUILT IN LOAD RESISTORS & BASS  BOOST AND COMPENSATION TECHNOLOGY  . BASS X RESTORES FORD BASS ROLL OFF, GROUND ISOLATION   & CLIP LIGHT & BASS KNOB  WITH VOLT METER   $ 575

• 2 channels of speaker level inputs (up to 40V input handling)

• 2 channels of RCA level outputs

• 2 channels of BASS outputs

• Bass boost and compensation technology

• Clip indicator

• Up to 9.5V of output

• 12V trigger output

• Level matching controls

• Turn-on mode selection (Remote, DC, Audio)

• On-board load resistors selection (20Ω, 60Ω, 20kΩ)

• Ground isolation selection (GND, ISO or 200Ω)

• Remote level controller with voltage display

THESE HARNESS WIL REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS INCLUDED .

KICKER HIDEAWAY POWERED SUB IN 10 INCH & 12 INCH

KIT 15  KICKER KEY 200.4 & 46HS10 HIDEAWAY 10 INCH SUB WITH BUILT IN 180 WATT RMS AMP $875

THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED

KIT 16 46HS10 HIDEAWAY 10 INCH SUB WITH BUILT IN 180 WATT RMS AMP & PLUG & PLAY HARNESS $450

KIT 17 KICKER 51HS12 HIDEAWAY & KICKER KEY 200.4 AMP WITH HARNESS $975

KIT 18 KICKER 51HS12 WITH HARNESS $525

KIT 19 KICKER KEY 200.4 4 CH AMP & KICKER KEY 500.1  MONO BLOCK SUB AMP WITH LOAD RESISTORS ADDED TO HARNESS $850

   KIT 20 KICKER KEY 500.1 AMP WITH HARNESS. $400

KIT 21 KICKER CXA4001T 400 WATT MONO BLOCK AMP & HARNESS $285

KIT 22 KICKER CXA8001T 800 WATT MONO BLOCK AMP & HARNESS $360

KIT 23 KICKER CXA12001T 1200 WATT MONO BLOCK AMP $460

 

 

KIT 24 MUSWAY SW-A7 6 1/2 POWERED SUB . 80 WATTS RMS WITH PLUG & PLAY HARNESS . SIZE OF A STACK OF PRINTER PAPER . $360

SW-A7 Product Overview

• Compact design: The Musway SW-A7 has a slim and compact design that allows it to fit under most car seats, making it an ideal solution for car audio enthusiasts who want to enhance their sound system without sacrificing space.
• Built-in amplifier: The subwoofer system has a built-in amplifier, which eliminates the need for a separate amplifier, making the installation process easier.
• Power handling: The SW-A7 has a peak power handling of 600 watts and a RMS power handling of 80 watts, providing a powerful and impactful bass response.
• Frequency response: The subwoofer system has a frequency response range of 20Hz-150Hz, providing a wide range of low-end frequencies.
• Sensitivity: The Musway SW-A7 has a sensitivity rating of 90dB, which means it can produce sound with high efficiency.
• Build quality: The Musway SW-A7 is built with high-quality materials, including a reinforced steel frame, a durable rubber surround, and a lightweight cone, which enhances its durability and longevity.
• Easy installation: The subwoofer system comes with an installation manual and mounting hardware, making it easy to install in most vehicles.
• Sound quality: The Musway SW-A7 delivers deep and impactful bass that enhances the overall sound quality of any car audio system. Its accurate and clear sound makes it an excellent addition to any car audio setup.

Product Specifications:

• ACTIVE UNDER SEAT-SUBWOOFER-SYSTEM
• 17CM（6.5“） SUBWOOFER
• Integrated Class A/B amplifier
• 1 x 80 Watts RMS, 1 x 600 Watts MAX
• LP Crossover 50-150 Hz
• Bass Boost 0-12dB @ 45 Hz
• Subsonicfilter 20 Hz fixed
• Phase Switch 0/180°, RCA Inputs
• Auto Turn-On, High Level Inputs
• Dimensions: 200 x 74 x 272 mm

 

 

 

KIT 25 MUSWAY FOUR100  4 CHANNEL 120 WATTS X 4  RMS AMP WITH PLUG & PLAY HARNESS

HIGH BUILD QUALITY GERMAN MADE  SMALL SIZE  PURE  CLEAN POWER BUILT IN LOAD RESISTORS  $660

 

 

FOUR100

 

• Start-Stop ready, Auto Turn-On

• EPS (Error Protection System)
• Interference Free Technology, EMC proved
• High and Low Level Inputs
• Brushed aluminum heat sink and end panels
• Compact Bass Level Remote Controller

FOUR100 

4-CHANNEL CLASS D AMPLIFIER  · 800 WATTS RMS

4 x 120/200 Watts RMS @ 4/2 Ohms

2 x 400 Watts RMS @ 4 Ohms bridged

Highpass Filter 50 - 5000 Hz (CH1/2)

Highpass Filter 10 - 500 Hz (CH3/4)

Lowpass Filter 50 - 5000 Hz (CH3/4)

Bass Boost 0 - 12 dB (CH3/4)

Bandpass Function (CH3/4)

CH3/4 > CH1/2 Copy Function

Input Mode Switch CH2/CH4

RCA Inputs, RCA Outputs

High Level Inputs with EPS

Auto Turn On Function

Bass Remote Controller

Dimensions: 150 x 45 x 220 mm

 

KIT 26 MUSWAY M4+ 4 CHANNEL DSP AMP WITH 8 CHANNEL OF DSP &  PLUG & PLAY HARNESS $940

 

100 WATTS X 4 @ 4 OHMS

135 WATTS X 4 @ 2 OHMS

 270 WATTS X 2 @ 4 OHMS BRIDGED

 

 

KIT 27 MUSWAY FIVE100 5 CHANNEL AMP WITH HARNESS $920

125 WATTS @ 4 OHMS X 4 & 250 WATTS @ 4 OHMS OR 425 WATTS @ 2 OHMS  650 WATTS @ 1 OHMS 

 

 

KIT 28 MUSWAY M5 5 CHANNEL DSP AMP & HARNESS $820

50 WATTS x 4 @ 4 OHMS + 180 @ 4 OHMS OR 300 WATTS @ 2 OHMS

SIZE OF A IPHONE .WILL FIT ON FACTORY SUB BOX 

KIT 29 MUSWAY M5 5 CHANNEL DSP AMP & HARNESS IN BI-AMP MODE $820

50 WATTS x 4 @ 4 OHMS TO RUN FRONT SPEAKERS ONLY .REAR PODS WILL RUN OFF OF RADIO POWER + 180 @ 4 OHMS OR 300 WATTS @ 2 OHMS FOR SUB

SIZE OF A IPHONE .

 

 

 

KIT 30 MUSWAY SIX100 6 CHANNEL FULL RANGE CLASS D AMP

110 WATTS X 6 @ 4 OHMS OR 110 WATTS X 4 FOR INTERIOR AND 360 WATTS BRIDGED @ 4 OHMS CHANNELS 5-6 FOR SUB  $900

 

SIX.100 Product Overview

• Start-Stop ready
• EPS (Intelligent High Level Input Error Protection System)
• Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards.
• High- and Low-Level Inputs
• Brushed aluminum heat sink and end panels
• Auto Turn On via DC Offset or Signal Sensing
• Remote level controller is included in the box

Product Specifications:

• 6 x 110/180 Watts RMS @ 4/2 Ohms
• 3 x 360 Watts RMS @ 4 Ohms bridged
• Highpass Filter 50 - 5000 Hz (CH1/2)
• Highpass Filter 10 - 500 Hz (CH3/4 & CH5/6)
• Lowpass Filter 50 - 5000 Hz (CH3/4 & CH5/6)
• Bandpass Function (CH3/4 & CH5/6)
• Bass Boost 0 - 12 dB (CH5/6)
• Input Mode Switch CH2/CH4/CH6
• RCA Inputs, RCA Outputs
• High Level Inputs with EPS
• Auto Turn On Function
• Bass Remote Controller
• Dimensions: 150 x 45 x 290 mm

 

 

KIT 31 MUSWAY M6 6 CHANNEL AMP WITH  8 CHANNEL OF DSP  WITH PLUG & PLAY HARNESS..  6 X 70 WATTS RMS @ 4 OHM . 6 X 105 WATTS RMS @ 2 OHMS . 210 WATTS RMS BRIDGED $1050

 

M6 Product Overview

• Start-Stop ready
• EPS (Intelligent High-Level Input-Error Protection System)
• Brushed aluminum heat sink and end panels
• Auto Turn On via DC Offset or Signal Sensing
• Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards
• Clipping LED’s
• With the easy-to-use MUSWAY PC software, the M6 can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet.
• With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips.

Product Specifications:

• 6 x 70/105 Watts RMS at 4/2 Ohms or
• 3 x 210 Watts RMS at 4 Ohms bridged
• 6 x High Level Input 4,8 – 20 V RMS
• 6 x RCA Low Level Input* (RCA) 2 – 6 V RMS
• 1 x AUX Input/Stereo (RCA) 2 – 6 V RMS
• 1 x Optical Input/Stereo (PCM, 96 kHz / 24 bit)
• 6 x Loudspeaker Output amplified
• 2 x Pre-Amplifier Output (RCA) 4 V RMS (configurable via DSP)
• Dimensions: 150 x 44 x 220 mm

KIT  32 MUSWAY M6PRO 6 CHANNEL AMP WITH 10 CH DSP. $1150

 

M6Pro Product Overview

• Start-Stop ready
• EPS (Intelligent High-Level Input-Error Protection System)
• Brushed aluminum heat sink and end panels
• Auto Turn On via DC Offset or Signal Sensing
• Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards
• Output Clipping LED
• With the easy-to-use MUSWAY PC software, the M6 can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet.
• With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips.

Product Specifications:

• OUTPUT POWER (RMS) @ 13.8 VDC, 1% THD
• 6 x 235 Watts RMS at 2 Ohms (DHR*)
• 6 x 120 Watts RMS at 4 Ohms
• 6 x 200 Watts RMS at 2 Ohms
• Bridged: 3 x 400 Watts RMS at 4 Ohms
• High Level Input 7 - 29V RMS
• Low Level Input* (AUX) 1 - 8V RMS

KIT 33 MUSWAY 8 CHANNEL  FULL RANGE CLASS D  AMPLIFIER .  $1200

 

KIT 34 MUSWAY STAND ALONE DSP 8 CHANNELS OF OUTPUT WITH PLUG & PLAY HARNESS. APP CONTROLLABLE FROM CELLPHONE AND PC . $700

DSP68 Product Overview

The award winning DSP68 features 8 channels of DSP processing, 6 Hi-Level Inputs, 6 Low Level Inputs (RCA), 2 AUX Inputs, 1 Optical Input, and 8 Low Level (RCA) Outputs (up to 6.5v) that are easily configurable via the DSP software. It also has Start-Stop technology and Intelligent Hi-Level Input EPS (Error Protection System) With the 3 optional USB Bluetooth Dongles you can stream standard or Hi-Res Audio, or have app control for DSP Tuning, HI-RES Audio and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips.

Product Highlights:

• Input: 6 x High/Low Level, 2 x AUX, 1 x Optical
• Output: 8 x RCA Outputs up to 6.5 Vrms
• Intelligent Hi-Level Input: 'EPS(Error Protection System)
• Start-Stop Ready, Auto Turn-On
• Burr-Brown converters (PCM3168A), Dual 32bit, 330 MIPS high-end DSP from Analog Devices DSP (ADAU1452) controllable via PC software or APP.
• Separately controllable input sensitivity (Channel 1-4, Channel 5-6, AUX), Clipping LEDs.

Product Specifications:

• Distortion - THD (1 kHz 1 Vrms Power): 0.05%
• Bandwidth (-3 dB, 6 V RMS, 492): 15 Hz - 22 kHz
• Output Voltage: 6.5V
• Input sensitivity: 3V -21V RMS (High-level); 1V - 5 V RMS(Low-level,Aux)
• Input impedance: 13 (High-level): 47 kA2 (Low-level)
• Operating Voltage: DC 8 -15V
• Dimensions (mm): 7.13 x 4.86 x 1.61 inches

 35 MUSWAY ONE.600 MONO BLOCK AMP WITH HARNESS AND BASS KNOB.  $525

ONE.600 Product Overview

• Start-Stop ready
• EPS (Intelligent High-Level Input-Error Protection System)
• Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must for Class D amplifiers. Passes the difficult European EMI standards.
• High- and Low-Level Inputs
• RCA (Low level) Output
• Brushed aluminum heat sink and end panels
• Auto Turn On via DC Offset or Signal Sensing
• Remote Bass Level Controller is included in the box

Product Specifications:

• 1 x 250 Watts RMS @ 4 Ohms
• 1 x 400 Watts RMS @ 2 Ohms
• 1 x 650 Watts RMS @ 1 Ohm
• Subsonic Filter 10 - 40 Hz
• Lowpass Filter 40 - 150 Hz
• Bass Boost 0 - 18 dB
• Phase Shift 0 - 180°
• RCA Inputs, RCA Outputs
• High-Level Inputs with EPSAuto Turn On Function
• Filter Bypass Function (Pure Amplification)
• Quick Connect Speaker Output
• Bass Remote Controller
• Dimensions: 150 x 45 x 240 mm

 

KIT 36 MUSWAY 0NE.1000 MONOBLOCK AMP WITH PLUG & PLAY HARNESS & BASS KNOB $650

ONE.1000 Product Overview

• Start-Stop ready
• EPS (Intelligent High-Level Input-Error Protection System)
• Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must for Class D amplifiers. Passes the difficult European EMI standards.
• High- and Low-Level Inputs
• RCA (Low Level) Output
• Brushed aluminum heat sink and end panels
• Auto Turn On via DC Offset or Signal Sensing
• Remote Bass Level Controller is included in the box

Product Specifications:

• 1 x 400 Watts RMS @ 4 Ohms
• 1 x 650 Watts RMS @ 2 Ohms
• 1 x 1050 Watts RMS @ 1 Ohm
• Subsonic Filter 10 - 40 Hz
• Lowpass Filter 40 - 150 Hz
• Bass Boost 0 - 18 dB
• Phase Shift 0 - 180°
• RCA Inputs, RCA Outputs
• High-Level Inputs with EPS
• Auto Turn On Function
• Filter Bypass Function (Pure Amplification)
• Quick Connect Speaker Output
• Bass Remote Controller
• Dimensions: 150 x 45 x 240 mm

CONVERTER & HARNESS FOR ADDING 4 CHANNEL AMP

KIT 37 17FT LOOPBACK HIGH LEVEL INPUT HARNESS TO RUN A 4 CH AMP  ONLY $195

KIT 38 NEW LC5IPRO WITH 17 FT PLUG & PLAY HARNESS . FRONT REAR AND SUB RCA OUTPUT & BUILT IN LOAD RESISTORS AND BASS KNOB  $430

KIT 39 LC5IPRO/LC7IPRO/ DSP LOOPBACK HARNESS ONLY AND LOW CURRENT 12V POWER AND GROUND OUTPUT WIRE $200