2020 AND UP FORD BRONCO & BRONCO SPORT .  I OFFER MANY DIFFERENT KITS FOR ADDING A SUB , ADDING A 4 CHANNEL AMP OR ADDING A DSP  AND OR FULL SYSTEM  ETC . AS WELL AS MY PLUG & PLAY KICKER  AUDIOCONTROL AND MUSWAY  PRODUCTS .  

USE THE DESCRIPTIONS BELOW AND THE DROP DOWN MENU ARROW ABOVE THIS MESSAGE  TO SELECT YOUR KIT . 

TAXES ARE INCLUDED ON ALL KITS EXCEPT FOR CT RESIDENTS . 

THIS IS THE ORDER AND DESCRIPTION OF THE DROP DOWN MENU

COMPLETE PACKAGE A 

KICKER KEY 200.4 AMP & HARNESS WITH 2 PAIRS OF KICKER KS SERIES 4 INCH FRONT AND REAR SPEAKERS AND 1 PAIR OF KICKER KS SERIES 6 1/2 KICK PANELS SPEAKERS WITH SPEAKER PLUGS AND BRACKETS  AND 4 PIECE PANEL TOOLS . $760

THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED .

COMPLETE PACKAGE B

KICKER KEY 200.4 AMP & HARNESS WITH 2 PAIRS OF KICKER KS SERIES 4 INCH FRONT AND REAR SPEAKERS AND 1 PAIR OF KICKER KS SERIES 6 1/2 KICK PANELS SPEAKERS WITH SPEAKER PLUGS AND BRACKETS 4 PIECE PANEL TOOLS AND 10 INCH 180 WATT HIDEAWAY POWERED SUB . $1130

THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED . 

PACKAGE C

STINGER TAILGATE BOX WITH PHOENIX GOLD SUB & KICKER KEY 500.1  MONO BLOCK AMP & PLUG & PLAY HARNESS WITH BASS KNOB $825

PACKAGE D

STINGER BOX WITH SUB &  AUDIOCONTROL LC-5.1300 1300 WATT 5 CH AMP TO RUN ENTIRE SYSTEM WITH PLUG & PLAY HARNESS AND 2 PAIRS OF KICKER KS 4 INCH SPEAKERS AND 1 PAIR OF KS SERIES 6 1/2 WITH SPEAKER PLUGS AND ADAPTERS INCLUDED $1580

PACKAGE E 

MUSWAY FOUR.1OO 4 CHANNEL CLASS D  120 WATTS  X 4 RMS AMP WITH HARNESS . NO NEED FOR FORSCAN CHANGES WITH THIS AMP . ALSO 2 PAIRS OF KICKER KS SERIES 4 INCH FRONT AND REAR SPEAKERS AND 1 PAIR OF KICKER KS SERIES 6 1/2 KICK PANELS SPEAKERS WITH SPEAKER PLUGS AND BRACKETS  AND 4 PIECE PANEL TOOLS . $900

PACKAGE F

MUSWAY M4+

4 CHANNEL DSP AMP 105 WATTS X 4 RMS WITH HARNESS AND 2 PAIRS OF KICKER KS SERIES 4 INCH FRONT AND REAR SPEAKERS AND 1 PAIR OF KICKER KS SERIES 6 1/2 KICK PANELS SPEAKERS WITH SPEAKER PLUGS AND BRACKETS . $1070

PACKAGE G

MUSWAY  6 CHANNEL AMP TO RUN ALL 6 SPEAKERS ON 6 CHANNELS  . 110 WATTS X 6 @ 4 OHMS.  NO MORE HAVING THE FRONTS DASH AND KICK PANELS SHARING POWER AND NEEDING BASS BLOCKERS AND NOT BEING ABLE TO SET CROSSOVERS AND POWER FOR EACH SPEAKER. 2 PAIRS OF KICKER KS SERIES 4 INCH FRONT AND REAR SPEAKERS AND 1 PAIR OF KICKER KS SERIES 6 1/2 KICK PANELS SPEAKERS WITH SPEAKER PLUGS AND BRACKETS  AND 4 PIECE PANEL TOOLS .  $1040

PACKAGE H

 MUSWAY M6 SIX CHANNEL DSP AMP WITH 10 CHANNELS OF DSP .  6 X 70 WATTS @ 4 OHMS . GIVE ALL 6 SPEAKERS THE POWER THEY NEED AND ALSO BE ABLE TO FINE TUNE ALL YOUR SPEAKERS . 

2 PAIRS OF KICKER KS SERIES 4 INCH FRONT AND REAR SPEAKERS AND 1 PAIR OF KICKER KS SERIES 6 1/2 KICK PANELS SPEAKERS WITH SPEAKER PLUGS AND BRACKETS  AND 4 PIECE PANEL TOOLS . $1200

PACKAGE I 2023 BRONCO SUB DELETE FULL SYSTEM PACKAGE GOOD

MUSWAY FOUR1OO 4 CHANNEL CLASS D 800 RMS AMP & HARNESS BRIDGED 400 WATTS FOR CHANNELS 1-2 FOR INTERIOR SPEAKERS AND CHANNELS 3-4 400 WATTS @4 OHM FOR SUB .  2 PAIRS OF KICKER KS SERIES 4 INCH FRONT AND REAR SPEAKERS AND 1 PAIR OF KICKER KS SERIES 6 1/2 KICK PANELS SPEAKERS WITH SPEAKER PLUGS AND BRACKETS AND 8 INCH KICKER COMP RT DUAL 2 OHM SUB AND 4 PIECE PANEL TOOLS . $1010

PACKAGE J  SUB DELETE FULL SYSTEM OPTION 2 BETTER

MUSWAY 6 CHANNEL AMP TO RUN ALL 6 SPEAKERS PLUS KICKER 8 INCH SUBWOOFER . 

120 WATTS RMS X 4  FOR INTERIOR SPEAKERS

395 WATTS @ 4 OHM BRIDGED FROM CHANNELS 5-6 TO RUN KICKER 8 INCH SUB 

KICKER KS 6 1/2 SPEAKERS  . 2 PAIRS OF KICKER KS 4 INCH SPEAKERS WITH SPEAKER PLUGS AND BRACKETS $1200

PACKAGE K

SUB DELETE FULL SYSTEM OPTION 3  BEST

MUSWAY 8 CHANNEL AMP TO RUN ALL 6 SPEAKERS PLUS KICKER 8 INCH SUBWOOFER . 

100 WATTS RMS X 6  FOR INTERIOR SPEAKERS

360 WATTS @ 4 OHM BRIDGED FROM CHANNELS 7-8 TO RUN KICKER 8 INCH SUB 

KICKER KS 6 1/2 SPEAKERS  . 2 PAIRS OF KICKER KS 4 INCH SPEAKERS WITH SPEAKER PLUGS AND BRACKETS $1435

PACKAGE L

SUB ONLY OPTION WITH 8 INCH KICKER COMP SUB . ( MUST TRIM SUB BOX OPENING TO FIT ) KICKER COMP 8 INCH DUAL 4 OHM SUB WITH KICKER KEY 500.1 AMP 300 WATTS @ 2 OHM RMS & HARNESS & KICKER 100% PURE COPPER AMP WIRING KIT . ALSO AMP KIT EXTENDS WARRANTY ON THE KEY 500.1 A EXTRA YEAR . $594

PACKAGE M

SUB ONLY OPTION WITH 8 INCH KICKER COMP SUB . 

( MUST TRIM SUB BOX OPENING TO FIT ) KICKER 8 INCH COMP DUAL 2 OHM WITH MUSWAY TWO100 AMP . 370 WATTS RMS @ 4 OHM BRIDGED ALSO WITH HARNESS . AMP IS THE SIZE OF A IPHONE WILL FIT EASILY NEXT TO SUB BOX $500

PACKAGE N 

SUB ONLY OPTION WITH 8 INCH KICKER COMP SUB . 

( MUST TRIM SUB BOX OPENING TO FIT ) 

KIICKER 8 INCH DUAL 4 OHM SUB WITH AUDIOCONTROL ACM 1.300 AMP 300 WATTS RMS @ 2 OHM . $610

PACKAGE O

SUB DELETE OPTION WITH KICKER 6.75 SUB 150 WATTS RMS  .DIRECT SIZE REPLACEMENT . NO TRIMMING NEEDED . KICKER 100% COPPER 8 GAUGE AMP KIT . ALSO EXTENDS A EXTRA YEAR WARRANTY ON KEY 500.1 AMP . $525

PACKAGE P

SUB DELETE OPTION WITH KICKER 6.75 SUB 150 WATTS RMS  .DIRECT SIZE REPLACEMENT . NO TRIMMING NEEDED . AUDIOCONTROL ACM -1.300 AMP 175 WATTS RMS @ 4 OHMS . $520

PACKAGE Q 

METRA REAR 6.5 INCH SPEAKER PODS KIT $239

PACKAGE R

METRA REAR PODS WITH KICKER KS 6 1/2 INCLUDED $330

SUB CONVERTERS WITH PLUG & PLAY HARNESS FOR ADDING BASS AMP KITS 1-10 

KIT 1 KICKER SUB CONVERTER WITH REMOTE WIRE OUTPUT $65

 KIT 2 PAC LPA 2.2 HIGH POWER SUB CONVERTER WITH BUILT LED CLIPPING DETECTION AND LOAD RESISTORS  $120

KIT 3 HIGH LEVEL INPUT HARNESS ONLY 6FT $80

KIT 4 HIGH LEVEL INPUT HARNESS ONLY 17FT $95

 KIT 7 PREMIUM AUDIOCONTROL LC21PRO WITH ACR-1 BASS KNOB AND 6FT CABLE $190

 KIT 8 PREMIUM AUDIOCONTROL LC2IPRO WITH ACR-1 AND 17FT CABLE $205

KIT 9 AUDIOCONTROL LC2IPRO HARNESS ONLY 6FT $80

KIT 10 AUDIOCONTROL LC2IPRO HARNESS ONLY 17FT $95

 LOOKING FOR 4 & 6.5 INCH KICKER SPEAKERS CLICK HERE KICKER – Plug N Play Kits

KICKER KEY 200.4 PLUG & PLAY 4 CHANNEL DSP AMP AND PLUG & PLAY VEHICLE SPECIFIC HARNESS. .

KIT 11 KICKER KEY 200.4  50 WATTS X 4 FOUR CHANNEL PLUG & PLAY AMP AND VEHICLE SPECIFIC HARNESS $430

KIT 11-1 KICKER KEY 180/200.4 HARNESS ONLY $225

KIT 11-2 KICKER KEY 200.4 WITH HARNESS WITH 17FT CORD & LOAD RESISTOR FOR HIGH LEVEL INPUT FOR POWERED SUB / AMP  $480

THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED .

 .

KIT 11-4 KICKER KEY HARNESS 180/200.4 ONLY WITH 17 FT HIGH LEVEL INPUT CABLE WITH LOAD RESISTOR  FOR SUB AMP POWERED SUB INSTALL         $ 275

 THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED . POWER WIRE & FUSE HOLDER & FUSE IS NOW INCLUDED .

KIT 11-5 KICKER KEY 200.4 HARNESS ONLY & 11HS8 HIDEAWAY 8 INCH SUB WITH BUILT IN 150 WATT RMS AMP $515

 THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED . POWER WIRE & FUSE HOLDER & FUSE IS NOW INCLUDED .

KIT 11-6 KICKER KEY 200.4 HARNESS ONLY & HS10  HIDEAWAY 10 INCH SUB WITH BUILT IN 180 WATT RMS AMP $550

 THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED . POWER WIRE & FUSE HOLDER & FUSE IS NOW INCLUDED .

KIT 12 KICKER KEY 200.4 AMP WITH PAC LPA 1.2 SUB RCA CONVERTER WITH BUILT IN LOAD RESISTORS AND LED CLIP LIGHT FOR EASY ADJUSTMENT .   $530

THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED .

KIT 12-1 KICKER KEY 200.4 HARNESS ONLY AND PAC LPA-1.2 SUB CONVERTER 17 FT HARNESS WITH BUILT IN LOAD RESISTORS & LED CLIP LIGHT FOR PROPER ADJUSTMENT AND RCA OUTPUTS & REMOTE WIRE OUTPUT FOR SUB AMP .  $325

 THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED . POWER WIRE & FUSE HOLDER & FUSE IS NOW INCLUDED .

 KIT 13 KICKER KEY 200.4 AMP WITH LC2IPRO AND 6FT HARNESS $ 600

 KIT 14 KICKER AMP WITH LC2IPRO AND 17FT HARNESS $ 600

KICKER HIDEAWAY POWERED SUB IN 10 INCH 

KIT 16  KICKER KEY 200.4 & 46HS10 HIDEAWAY 10 INCH SUB WITH BUILT IN 180 WATT RMS AMP $ 795

THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED . 

KIT 18 46HS10 HIDEAWAY 10 INCH SUB WITH BUILT IN 180 WATT RMS AMP & PLUG & PLAY HARNESS $375

KIT 19 KICKER KEY 200.4 4 CH AMP & KICKER KEY 500.1  MONO BLOCK SUB AMP WITH LOAD RESISTORS ADDED TO HARNESS $ 700

KICKER PK8 WIRING KIT NEEDED FOR 500.1 INSTALL.

SELECT 8 GAUGE 100% PURE COPPER KICKER AMP KIT UNDER INSTALLATION ACCESSORIES .

KIT 19 -1 KICKER KEY 200.4 AND KICKER KEY 500.1 17 FT  PLUG & PLAY HARNESS ONLY . POWER &  GROUND REQUIRED FOR 500.1   $285

 THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED . POWER WIRE & FUSE HOLDER & FUSE IS NOW INCLUDED  FOR 200.4 ONLY .

   KIT 20 KICKER KEY 500.1 AMP WITH HARNESS. $300

KIT 22 KICKER CXA8001T 800 WATT MONO BLOCK AMP & HARNESS $360

 KIT 23 KICKER KEY 500.1 / CXA 400 , 800 , 1200, MONO AMPS 17FT RCA HARNESS ONLY $95

KIT 24  PHOENIX GOLD SWING GATE 12-INCH SUBWOOFER ENCLOSURE FOR FORD BRONCO TXFBB12 $379 

ENCLOSURE FEATURES

Roadkill-Armor Coat

Permanent Heat Bonded EPM Enclosure Coating
(Elastomeric Polyurethane Molecule)

Weather-Resistant for Harsh Outdoor Environments

Sound Dampening Properties for Resonance Reduction

Scratch, Crack, and Peel-Resistant

Chemical and Stain-Resistant

Impact Absorption

UV Protection

Provides Leak and Corrosion Prevention

Heavy-Duty 11-Layer High-Density Plywood Construction

Durable, Coated Steel Subwoofer Grill for Extra Protection

KIT 25 KICKER 12 INCH 500  WATT TRTP DOWN FIRING BOX $275

KIT 26 KICKER 10 INCH 400  WATT TRTP DOWN FIRING BOX .$260

KIT 27 500 WATTS Down-Firing 10" L7T 2-Ohm Enclosure $300

TYPE:
downfire
WOOFER SIZE (in, cm):
10, 25
IMPEDANCE (Ohms):
2
Recommended Amplifier Power (watts RMS)
500
SENSITIVITY (dB 1w/1m):
84.1

BOX DIMENSIONS

DIMENSION A (in, cm):

14-3/8, 36.5

DIMENSION B (in, cm):

23-3/8, 59.5

DIMENSION C (in, cm):

6-1/8, 15.6

 

 

KIT 28 MUSWAY SW-A7 6 1/2 POWERED SUB . 80 WATTS RMS WITH PLUG & PLAY HARNESS . SIZE OF A STACK OF PRINTER PAPER . $360

SW-A7 Product Overview

• Compact design: The Musway SW-A7 has a slim and compact design that allows it to fit under most car seats, making it an ideal solution for car audio enthusiasts who want to enhance their sound system without sacrificing space.
• Built-in amplifier: The subwoofer system has a built-in amplifier, which eliminates the need for a separate amplifier, making the installation process easier.
• Power handling: The SW-A7 has a peak power handling of 600 watts and a RMS power handling of 80 watts, providing a powerful and impactful bass response.
• Frequency response: The subwoofer system has a frequency response range of 20Hz-150Hz, providing a wide range of low-end frequencies.
• Sensitivity: The Musway SW-A7 has a sensitivity rating of 90dB, which means it can produce sound with high efficiency.
• Build quality: The Musway SW-A7 is built with high-quality materials, including a reinforced steel frame, a durable rubber surround, and a lightweight cone, which enhances its durability and longevity.
• Easy installation: The subwoofer system comes with an installation manual and mounting hardware, making it easy to install in most vehicles.
• Sound quality: The Musway SW-A7 delivers deep and impactful bass that enhances the overall sound quality of any car audio system. Its accurate and clear sound makes it an excellent addition to any car audio setup.

Product Specifications:

• ACTIVE UNDER SEAT-SUBWOOFER-SYSTEM
• 17CM（6.5“） SUBWOOFER
• Integrated Class A/B amplifier
• 1 x 80 Watts RMS, 1 x 600 Watts MAX
• LP Crossover 50-150 Hz
• Bass Boost 0-12dB @ 45 Hz
• Subsonicfilter 20 Hz fixed
• Phase Switch 0/180°, RCA Inputs
• Auto Turn-On, High Level Inputs
• Dimensions: 200 x 74 x 272 mm

 

 

 

KIT 29 MUSWAY FOUR100  4 CHANNEL 120 WATTS X 4  RMS AMP WITH PLUG & PLAY HARNESS

HIGH BUILD QUALITY GERMAN MADE  SMALL SIZE  PURE  CLEAN POWER BUILT IN LOAD RESISTORS  $600

 

 

FOUR100

The new amplifiers of the MX series are ideally suited not only to enter into optically ingenious combinations with the Musway DSP amps M4+, M6 or D8. Of course, they are also perfect for forming a high-end team with the TUNE12, DSP68PRO or DSP68 stand-alone processor. With the MX models it is therefore possible to create powerful 7, 8 or even 12-channel combinations. The elegantly designed amps convey their qualities as soon as they are touched: No rattling sheet metal, heat sinks and end panels made of brushed aluminum and a flush Musway logo on top. The amplifiers have everything on board that a modern sound system needs: EPS, auto turn-on, high and low level inputs and much more. The ingeniously switchable crossovers in the multi-channel amplifiers offer every imaginable configuration - whether fully active, semi active or passive operation, everything is possible.

• Start-Stop ready, Auto Turn-On

• EPS (Error Protection System)
• Interference Free Technology, EMC proved
• High and Low Level Inputs
• Brushed aluminum heat sink and end panels
• Compact Bass Level Remote Controller

FOUR100 

4-CHANNEL CLASS D AMPLIFIER  · 800 WATTS RMS

4 x 120/200 Watts RMS @ 4/2 Ohms

2 x 400 Watts RMS @ 4 Ohms bridged

Highpass Filter 50 - 5000 Hz (CH1/2)

Highpass Filter 10 - 500 Hz (CH3/4)

Lowpass Filter 50 - 5000 Hz (CH3/4)

Bass Boost 0 - 12 dB (CH3/4)

Bandpass Function (CH3/4)

CH3/4 > CH1/2 Copy Function

Input Mode Switch CH2/CH4

RCA Inputs, RCA Outputs

High Level Inputs with EPS

Auto Turn On Function

Bass Remote Controller

Dimensions: 150 x 45 x 220 mm

 

KIT 30 MUSWAY M4+ 4 CHANNEL DSP AMP WITH 8 CHANNEL OF DSP &  PLUG & PLAY HARNESS $830

 

100 WATTS X 4 @ 4 OHMS

135 WATTS X 4 @ 2 OHMS

 270 WATTS X 2 @ 4 OHMS BRIDGED

 

 

KIT 31 MUSWAY FIVE100 5 CHANNEL AMP WITH HARNESS $850

125 WATTS @ 4 OHMS X 4 & 250 WATTS @ 4 OHMS OR 425 WATTS @ 2 OHMS  650 WATTS @ 1 OHMS 

 

 

KIT 32 MUSWAY M5 5 CHANNEL DSP AMP & HARNESS $700

50 WATTS x 4 @ 4 OHMS + 180 @ 4 OHMS OR 300 WATTS @ 2 OHMS

SIZE OF A IPHONE .WILL FIT ON FACTORY SUB BOX 

KIT 33 MUSWAY M5 5 CHANNEL DSP AMP & HARNESS IN BI-AMP MODE $700

50 WATTS x 4 @ 4 OHMS TO RUN FRONT SPEAKERS ONLY .REAR PODS WILL RUN OFF OF RADIO POWER + 180 @ 4 OHMS OR 300 WATTS @ 2 OHMS FOR SUB

SIZE OF A IPHONE .WILL FIT ON FACTORY SUB BOX 

 

 

KIT 34 MUSWAY SIX100 6 CHANNEL FULL RANGE CLASS D AMP

THIS IS A GREAT AMP FOR THE BRONCO  WITH THIS AMP YOU CAN POWER YOUR FRONT 4 INCH SEPARATELY AND GIVE YOUR FRONT STAGE THE POWER AND TUNE ADJUSTABILITY THEY NEED 

110 WATTS X 6 @ 4 OHMS OR 110 WATTS X 4 FOR INTERIOR AND 360 WATTS BRIDGED @ 4 OHMS CHANNELS 5-6 FOR SUB  $760

 

SIX.100 Product Overview

• Start-Stop ready
• EPS (Intelligent High Level Input Error Protection System)
• Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards.
• High- and Low-Level Inputs
• Brushed aluminum heat sink and end panels
• Auto Turn On via DC Offset or Signal Sensing
• Remote level controller is included in the box

Product Specifications:

• 6 x 110/180 Watts RMS @ 4/2 Ohms
• 3 x 360 Watts RMS @ 4 Ohms bridged
• Highpass Filter 50 - 5000 Hz (CH1/2)
• Highpass Filter 10 - 500 Hz (CH3/4 & CH5/6)
• Lowpass Filter 50 - 5000 Hz (CH3/4 & CH5/6)
• Bandpass Function (CH3/4 & CH5/6)
• Bass Boost 0 - 12 dB (CH5/6)
• Input Mode Switch CH2/CH4/CH6
• RCA Inputs, RCA Outputs
• High Level Inputs with EPS
• Auto Turn On Function
• Bass Remote Controller
• Dimensions: 150 x 45 x 290 mm

 

 

KIT 35 MUSWAY M6 6 CHANNEL AMP WITH  8 CHANNEL OF DSP  WITH PLUG & PLAY HARNESS..  6 X 70 WATTS RMS @ 4 OHM . 6 X 105 WATTS RMS @ 2 OHMS . 210 WATTS RMS BRIDGED $925

 

M6 Product Overview

• Start-Stop ready
• EPS (Intelligent High-Level Input-Error Protection System)
• Brushed aluminum heat sink and end panels
• Auto Turn On via DC Offset or Signal Sensing
• Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards
• Clipping LED’s
• With the easy-to-use MUSWAY PC software, the M6 can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet.
• With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips.

Product Specifications:

• 6 x 70/105 Watts RMS at 4/2 Ohms or
• 3 x 210 Watts RMS at 4 Ohms bridged
• 6 x High Level Input 4,8 – 20 V RMS
• 6 x RCA Low Level Input* (RCA) 2 – 6 V RMS
• 1 x AUX Input/Stereo (RCA) 2 – 6 V RMS
• 1 x Optical Input/Stereo (PCM, 96 kHz / 24 bit)
• 6 x Loudspeaker Output amplified
• 2 x Pre-Amplifier Output (RCA) 4 V RMS (configurable via DSP)
• Dimensions: 150 x 44 x 220 mm

KIT  35-1 MUSWAY M6PRO 6 CHANNEL AMP WITH 10 CH DSP. $1050

 

M6Pro Product Overview

• Start-Stop ready
• EPS (Intelligent High-Level Input-Error Protection System)
• Brushed aluminum heat sink and end panels
• Auto Turn On via DC Offset or Signal Sensing
• Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards
• Output Clipping LED
• With the easy-to-use MUSWAY PC software, the M6 can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet.
• With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips.

Product Specifications:

• OUTPUT POWER (RMS) @ 13.8 VDC, 1% THD
• 6 x 235 Watts RMS at 2 Ohms (DHR*)
• 6 x 120 Watts RMS at 4 Ohms
• 6 x 200 Watts RMS at 2 Ohms
• Bridged: 3 x 400 Watts RMS at 4 Ohms
• High Level Input 7 - 29V RMS
• Low Level Input* (AUX) 1 - 8V RMS

KIT 36 MUSWAY 8 CHANNEL  FULL RANGE CLASS D  AMPLIFIER .  $999

THIS IS A GREAT AMP FOR THE BRONCO  WITH THIS AMP YOU CAN POWER YOUR FRONT 4 INCH SEPARATELY AND GIVE YOUR FRONT STAGE THE POWER AND TUNE ADJUSTABILITY THEY NEED AND ALSO USE CHANNELS 7-8 BRIDGED TO RUN A 8 INCH KICKER SUB IN THE FACTORY SUB BOX. $1100

 

KIT 37 MUSWAY STAND ALONE DSP 8 CHANNELS OF OUTPUT WITH PLUG & PLAY HARNESS. APP CONTROLLABLE FROM CELLPHONE AND PC . $630

DSP68 Product Overview

The award winning DSP68 features 8 channels of DSP processing, 6 Hi-Level Inputs, 6 Low Level Inputs (RCA), 2 AUX Inputs, 1 Optical Input, and 8 Low Level (RCA) Outputs (up to 6.5v) that are easily configurable via the DSP software. It also has Start-Stop technology and Intelligent Hi-Level Input EPS (Error Protection System) With the 3 optional USB Bluetooth Dongles you can stream standard or Hi-Res Audio, or have app control for DSP Tuning, HI-RES Audio and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips.

Product Highlights:

• Input: 6 x High/Low Level, 2 x AUX, 1 x Optical
• Output: 8 x RCA Outputs up to 6.5 Vrms
• Intelligent Hi-Level Input: 'EPS(Error Protection System)
• Start-Stop Ready, Auto Turn-On
• Burr-Brown converters (PCM3168A), Dual 32bit, 330 MIPS high-end DSP from Analog Devices DSP (ADAU1452) controllable via PC software or APP.
• Separately controllable input sensitivity (Channel 1-4, Channel 5-6, AUX), Clipping LEDs.

Product Specifications:

• Distortion - THD (1 kHz 1 Vrms Power): 0.05%
• Bandwidth (-3 dB, 6 V RMS, 492): 15 Hz - 22 kHz
• Output Voltage: 6.5V
• Input sensitivity: 3V -21V RMS (High-level); 1V - 5 V RMS(Low-level,Aux)
• Input impedance: 13 (High-level): 47 kA2 (Low-level)
• Operating Voltage: DC 8 -15V
• Dimensions (mm): 7.13 x 4.86 x 1.61 inches

 38 MUSWAY ONE.600 MONO BLOCK AMP WITH HARNESS AND BASS KNOB.  $440

ONE.600 Product Overview

• Start-Stop ready
• EPS (Intelligent High-Level Input-Error Protection System)
• Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must for Class D amplifiers. Passes the difficult European EMI standards.
• High- and Low-Level Inputs
• RCA (Low level) Output
• Brushed aluminum heat sink and end panels
• Auto Turn On via DC Offset or Signal Sensing
• Remote Bass Level Controller is included in the box

Product Specifications:

• 1 x 250 Watts RMS @ 4 Ohms
• 1 x 400 Watts RMS @ 2 Ohms
• 1 x 650 Watts RMS @ 1 Ohm
• Subsonic Filter 10 - 40 Hz
• Lowpass Filter 40 - 150 Hz
• Bass Boost 0 - 18 dB
• Phase Shift 0 - 180°
• RCA Inputs, RCA Outputs
• High-Level Inputs with EPSAuto Turn On Function
• Filter Bypass Function (Pure Amplification)
• Quick Connect Speaker Output
• Bass Remote Controller
• Dimensions: 150 x 45 x 240 mm

 

KIT 39 MUSWAY 0NE.1000 MONOBLOCK AMP WITH PLUG & PLAY HARNESS & BASS KNOB $570

ONE.1000 Product Overview

• Start-Stop ready
• EPS (Intelligent High-Level Input-Error Protection System)
• Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must for Class D amplifiers. Passes the difficult European EMI standards.
• High- and Low-Level Inputs
• RCA (Low Level) Output
• Brushed aluminum heat sink and end panels
• Auto Turn On via DC Offset or Signal Sensing
• Remote Bass Level Controller is included in the box

Product Specifications:

• 1 x 400 Watts RMS @ 4 Ohms
• 1 x 650 Watts RMS @ 2 Ohms
• 1 x 1050 Watts RMS @ 1 Ohm
• Subsonic Filter 10 - 40 Hz
• Lowpass Filter 40 - 150 Hz
• Bass Boost 0 - 18 dB
• Phase Shift 0 - 180°
• RCA Inputs, RCA Outputs
• High-Level Inputs with EPS
• Auto Turn On Function
• Filter Bypass Function (Pure Amplification)
• Quick Connect Speaker Output
• Bass Remote Controller
• Dimensions: 150 x 45 x 240 mm

CONVERTER & HARNESS FOR ADDING 4 CHANNEL AMP

 KIT 40  4 CHANNEL/ HI LEVEL INPUT / LOOP BACK HARNESS WITH LOAD RESISTOR FOR ADDING A 4 CH AMP WITH HIGH LEVEL INPUT . $195

CONVERTERS & HARNESS FOR ADDING FULL SYSTEM  

KIT 41 NEW LC5IPRO WITH 17 FT PLUG & PLAY HARNESS . FRONT REAR AND SUB RCA OUTPUT & BUILT IN LOAD RESISTORS AND BASS KNOB  $380

KIT 42  LC5IPROI/LC7IPRO/ DSP LOOPBACK HARNESS ONLY WITH REQUIRED LOAD RESISTORS AND LOW CURRENT 12V POWER OUTPUT WIRE $195

 AUDIOCONTROL MONO BLOCK SUB AMPS WITH BUILT IN LC2I AND ACCUBASS

KIT 43  ACM-1.300  300 WATT RMS  @ 2 OHMS AMP WITH 17FT PLUG & PLAY HARNESS $440

  CLICK HERE FOR AMP INFO 

KIT 44 LC-1.800 800 WATT RMS @ 2 OHMS MONO BLOCK WITH 17FT PLUG & PLAY HARNESS $560

    CLICK HERE FOR AMP INFO

KIT 45 LC-1.1500 1500 WATT RMS @ 2 OHMS AMP WITH 17FT PLUG & PLAY HARNESS $900 

   CLICK HERE FOR AMP INFO 

AUDIOCONTROL 4 CHANNEL AMPS WITH 17FT PLUG & PLAY HARNESS

KIT 46 AUDIOCONTROL ACM -4.300 4 x 50 WATTS @ 4 OHMS  75 X 4 @ 2 OHMS AMP WITH 17FT PLUG & PLAY HARNESS $500

KIT 47 LC-4.800 125W X 4 @ 4 OHMS 200W X 4 @ 2 OHMS AMP WITH 17FT PLUG & PLAY HARNESS $750

 CLICK HERE FOR AMP INFO 

KIT 48  D-4.800 DSP MATRIX AMP WITH 17FT PLUG & PLAY HARNESS $950

   CLICK HERE FOR AMP INFO 

 KIT 49 AUDIOCONTROL ACM-4.300 & ACM-1.300 $790

KIT 50 AUDIOCONTROL 5 CHANNEL 1300 WATT AMP WITH 17FT PLUG & PLAY HARNESS $970

KIT 51 AUDIOCONTROL D-5.13OO  $1400

KIT 52 LC-6.1200 6 CHANNEL 1200 WATT AMP WITH PLUG & PLAY HARNESS $970

CLICK HERE FOR AMP INFO  

KIT 53 D-6.1200 6 CHANNEL  DSP MATRIX AMP WITH 17FT PLUG & PLAY HARNESS $1300

  CLICK HERE FOR AMP INFO